GB-MOD Lyneham: Control Equipment Training Aids (CETA)
This sits in the upper-middle of the Education & Training band — a substantial contract for the sector. Based on 23,516 valued Education & Training tenders in our corpus.
1.
The Defence Collage of Technical Training (DCTT) Defence School of Electronic and Mechanical Engineering (DSEME) Common Engineering Applications, (CEA), Department requires 8 x Control Equipment Training Aids, Software Package and 5 year maintenance and servicing package to replace obsolete training aids within the site.
The servo mechanisms and software shall be provided with all the required associated components and a full suite of training aids.
2.
The solution provided must be capable of operating against the design specifications of the LEARN network.
At present the system is a standard Windows Server 2016 environment based on VMWare ESXi hosts with Cisco networking equipment; however over time this will update and so it is necessary to check current status before commencing development.
The solution must also be structured to operate on a Moodle Virtual Learning Environment (VLE), currently at Moodle 3.1 but will also update.
3.
The training aids and software is to be supplied and installed no later than 8 January 2018 (IOC) to the site.
4.
The site has suitable power to accommodate the servo mechanisms.
The system software should be installed without relying on the existing network infrastructure or the Defence network (Dii(f)).
5.
Suitable training is to be provided for all associated instructors, detailing all aspects of the simulator and the instillation and is to be carried out on site at DSEME.
SCOPE - Control equipment training equipment provides the environment by which Artificers can apply control theory to problem and design based problems during training to meet current and future training objectives.
The equipment must have scope for the study of analogue and digital control, support Training Objectives and meet the academic assignments, (Level 6), requirements of the BSc qualification.
CONTROL ENGINEERING TRAINING EQUIPMENT REQUIREMENTS 13.
The control engineering training equipment must be capable of: a.
Simulation and display of Nyquist and Bode for closed and open loop transfer function analysis for gain and stability determination. b.
Design and application of three term analogue control, Proportional, Integral and Derivative, (PID), with the option to separate and use combinations of PID. c.
Simulation of the effects of positive and negative feedback on system performance and behaviour. d.
Digital control transfer function analysis e.
Digital speed and positional measurement f.
Digital controllers which control physical hardware and simulate the units outcome. g.
Integrated software package which provides a firmware capability for integrated circuits. h.
System transfer function analysis, time constant i.
Feed forward systems, velocity feedback j.
Motor and Eddy current characteristics k.
Analogue to digital conversion
What the supplier must deliver
The servo mechanisms and software shall
The servo mechanisms and software shall be provided with all the required associated components and a full suite of training aids.
The solution provided must be capable
The solution provided must be capable of operating against the design specifications of the LEARN network.
The solution must also be structured
The solution must also be structured to operate on a Moodle Virtual Learning Environment (VLE), currently at Moodle 3.1 but will also update.
The system software should be installed without
The system software should be installed without relying on the existing network infrastructure or the Defence network (Dii(f)).
The equipment must have scope for
The equipment must have scope for the study of analogue and digital control, support Training Objectives and meet the academic assignments, (Level 6), requirements of the BSc qualification.
Derived from the notice text — always confirm against the original documents.
Make the case to bid
Reveal who to approach at Air Commercial Team, and generate a go-to-market strategy from their news, accounts and people.
- OCID
- b792e982-9d8e-4825-8084-a5d8c0825456
- Stage
- contract · Contract
- Source
- Contracts Finder
- Buyer ref
- BIP57424966
Contains public sector information licensed under the Open Government Licence v3.0. Source data © Crown copyright.
Who wins this kind of work
The suppliers and buyers around this opportunity — drawn from official award data. Drag to orbit; click a node to explore.
Top suppliers & buyers in Education & Training
Assembling the market network…
Air Commercial Team’s tender network
Assembling the network…