This is a contract result notice, not an open opportunity. Details from the official award data.

The university requires two autoclaves to be used for general laboratory biohazard waste disposal (fluids, plastics, agar plates, etc.).

Both autoclaves shall: • Be fully installed and commissioned by 8th September 2023 • Come with minimum 12-month warranty • Come with maintenance contract Main autoclave: • Minimum sterilisation of 121 degrees for 15 minutes • Minimum 200 litre capacity • Plumbed in • Square chamber • Pre- and post-vacuum system • Internal steam generator • Steam jacket • Vertical sliding door • Water softener discard box • Maximum External Dimensions of machine: Width = 760mm, Height = 1900mm, Depth = 1650mm (including pipework) • Must fit through doorway entrance (both inner and outer doors): 770mm Existing on-site services: • Mains water supply • 3 phase (63Amp) electrical power • Drainage Small autoclave: • Minimum sterilisation of 121 degrees for 15 minutes • Minimum 40 litre capacity with electrically heated elements. • No plumbing requirements. • Maximum External Dimensions of machine: Width = 600mm, Height = 725mm, Depth = 775mm • Stand included to hold autoclave at a height of at least 900mm above floor.

The procurement will be conducted exclusively via the university's e-tendering website, where all documentation can be found and downloaded: https://neupc.delta-esourcing.com/members/leeds-trinity-university/ Accessing a Tender Opportunity via the university's e-tendering website: Once you have created a supplier profile, to respond to an opportunity, click 'Response Manager' or 'View Invites and Responses'.

You will then be presented with a list of all opportunities your organisation has previously worked on and be given the option of viewing current invites or entering the access code to begin responding to a new opportunity Note: Project: LAB001LTU Autoclaves for Biomed Opening Date : 06/04/2023 09:00 Closing Date : 02/05/2023 10:00 Access Code : 8429SB7Z35