Lifts Replacement

It is the intention that there will be several lift replacements completed over the next 3-5 years. First phase will be completed in summer 2023 and this will include the Tithebarn 5 storey evacuation lift replacement, education building 6 storey evacuation lift, James Parsons 11 floor goods/passenger lift. The goods lift will include construction works to form lift opening to the rooftop. LJMU will provide a full specification and requirements within the final ITT documents. Contractors will be expected to provide in the tender the following: (but not limited to)

• Manufacture and assembly of lifts

• Delivery to site of all lift components, offloading and moving into position

• Supply and installation of primary and secondary steelworks

• Erection of the lifts

• The installation shall include all equipment required to produce a working installation complying with all relevant standards and as described in the employers' requirements document for new lift installations

• Grouting bolts, fixing brackets, other fixings and inserts shall be provided

• Electrical installations shall also be provided

• Permanent ladders shall be provided to lift pit.

• Lift landing entrance and sill supporting steelwork

• The Lift Contractor shall provide structural details, accurate setting out and safe working load information, including that for any lift beams or lifting equipment within the lift well as required for the lift installation and maintenance

• Associated Builders & Electrical Works

• Management of building works